Army Gas Mask M50 Pmcs Powerpoint

M50 Specifications

  • Full face CBRN protective mask
  • Single lens for wide field of view
  • Material: Chlorobutyl rubber silicone
  • Worn Mask Weight: 30 oz
  • Total Weight: 3.6 lbs
  • 6 point adjustable harness
  • Ballistic polycarbonate outer lens
  • Nylon mildew-resistant carrier bag
  • Twin M61 twist-lock filters
  • Filter Weight: 10 oz

Perform operator level PMCS on the mask, clean his assigned protective mask, and replace the. Water canteen cap for the M50 /M51 protective mask. Awareness of a CBRN hazard results in warning,alerting, and reporting that provide hazard data which is key to decentralized operationaldecisions at all levels within the joint force. See full list on asc.army.mil. The M50/M51 masks replace the M40 and M42, MCU2/P series masks and the M45 in the Land Warrior Program. The M53A1 can be used in either Air-Purifying Respirator, Powered Air Purifying Respirator, or Self-Contained Breathing Apparatus mode, and is the first mask to be approved for both domestic response (National Institute for Occupational. ARMY AIR FORCE MARINE CORPS NAVY (NAVSEA) TM 3-4240-542-13&P T.O. 14P4-20-1 TM 09204G/09205G-OI/1 S6470-AD-OMP-010 TECHNICAL MANUAL OPERATOR AND FIELD MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR MASK, CHEMICAL-BIOLOGICAL: JOINT SERVICE GENERAL PURPOSE, FIELD, M50 (4240-01-512-4431) SMALL (4240-01-512-4434) MEDIUM (4240-01-512-4437) LARGE AND MASK.

What They Got Right on the M50 Gas Mask

The M50 gas mask is a one of the best protective masks on the market for chemical, biological, and radiological personal defense. The lens was designed with almost every military task in mind, which give it a great field of vision. The chlorobutyl rubber silicone mask is one of the best protective skins used on gas masks to date. The head harness is very adjustable, using velcro straps which makes the fit versatile but sturdy. No more adjusting the mask each and every time you put it on.

The dual filters are one of the best features of this mask. By putting filters on both sides of the mask, it made the mask easier to breath through. It also reduces the profile of the filters which is much better for tasks close to your face, such as sighting a rifle. Having a filter on each side of the mask balances the weight, and makes it much less likely to have the mask unseal from your face from being hit or jostled. The filters also contain a white tab that turns blue when the filter is contaminated or expired.

The M50 is compatible with a wide range of accessories, from canteens to Camelbaks. A voice emitter can also be attached to the front of the mask to be able to project your voice more easily. You can clean the mask using warm soapy water, but only after removing the filters. Don’t use bleach or alcohol wipes since they can yellow the lens and break down the mask itself over time.

What They Got Wrong on the M50 Gas Mask

The M50, while a great mask, still has its vulnerabilities and issues. It is still not a self contained breathing apparatus (SCBA), so you need to be aware that it does not provide oxygen in oxygen depleted environments. Some HAZMAT chemicals, such as chlorine, can make the filter not last quite as long too. Ion video 2 pc software download for mac. Knowing your limitations with the mask is important, since masks can provide a false sense of security if you are dealing with unknown chemicals or substances.

Our Experience With the M50 Gas Mask

Pmcs

I have owned a M50 protective mask for eight years now. I have worn it for up to 12 hours at a time. I wore it weekly for about a two year span, teaching classes while exposed to tear gas in a gas chamber. I have worn it while exposed to live Vx nerve agent and other deadly chemical weapons. I’m still here, able to type up this review, so that is pretty good proof that this mask is a workhorse of a protective mask.

One of the best features I always liked was how easy it is to wear. The balanced filters are great. They also tweaked the lens on it to not distort anything, so everything appears as it would normally. This is important when using a firearms, and it made firing both the pistol and rifle much easier. Sniper elite v2 remastered mods. The M50 is the best mask I have worn, and I can compare it to the MCU-2P, M45, M40, M17, Russian GP-5, Israeli FM12, and the 3M 6700.

Where to Buy the M50:

You may be able to find the M50 at a military surplus store, but they will not be common since they are still in service. Finding one online is hit and miss, but I would not suggest spending more than $200 on one. Be sure you are getting one from a reputable dealer so you don’t get a used mask that is not longer serviceable. Here are some reputable online dealers for the M50 and accessories:

The Final Word

The M50 is one of the best masks you can get. While some of the Avon and 3M full face respirators offer similar performance, the M50 is the only option that is rugged enough to withstand a survival situation with ease. The thick chlorobutyl rubber silicone will keep you protected but is still lightweight enough to be tolerable for long periods. If you are in the market for a protective mask, you should definitely consider picking up an M50.

You can check out our comprehensive gas mask guide to see more of our thoughts on the best gas masks and any more information about gas masks that you may want to know.

You’ve Been Missing Out

Join 22,196 preppers getting no-spin prepping advice by subscribing to TruePrepper.
  • Practical guides and tips
  • Useful survival giveaways
  • Free, forever
  • < 0.4% of people unsubscribe
Thanks for subscribing, reading, and welcome to the club.
(Redirected from M50 Joint Service General Purpose Mask)
M50 joint service general purpose mask
TypeProtective mask
Place of originUnited States
Service history
In service2009–present
Used bySee Users
Production history
Produced2009–present

The M50 series protective mask consisting of the M50 and M51 variants, officially known as the Joint Service General Protective Mask (JSGPM) is a lightweight, protective mask system consisting of the mask, a mask carrier, and additional accessories.

Matlab 32 bit trial free download. The mask was designed to incorporate state-of-the-art technologies to protect United States Armed Forces and allied forces from current and anticipated threats from all types of weapons of mass destruction. It is an above-the-neck, chemical-biological (CB) respirator that protects against battlefield concentrations of CB agents, toxins, toxic industrial materials and radioactive particulate matter. The M50/51 masks replace the M40 field protective mask and M42, MCU-2/P series masks and the M45 of the Land Warrior Program. There are two mask variants: M50 (ground and shipboard use) and M51 (ground vehicle use).[1]

Army Gas Mask M50 Pmcs Powerpoint

History[edit]

The M50 series mask entered into service in December 2009.[2][3]

Description[edit]

The M50 series is certified to MIL-SPEC PRF-EA-10003. The mask design features improved performance against chemical and biological agents, toxic industrial chemicals, and nuclear fallout. The dual, low profile filters reduce weight and bulk while reducing breathing resistance by fifty percent over the M40 series mask. The filters incorporate a shelf-life indicator patch which changes colors from white to blue when the filters are no longer serviceable. The mask face blank incorporates self sealing filter mounts that allow for filter changes in a contaminated environment.

The single element eye lens gives the mask a 96 degree field of view and improved compatibility with military equipment and battlefield optical systems. The drinking system of the mask allows for greater liquid flow however, is not compatible with previous drinking systems. Consequently, the mask is normally issued with an M50 series compatible canteen cap.

The lifetime ownership cost of the mask was reduced by fifty percent when compared with the M40 series mask due to a lower repair part count, all maintenance being completed at the operator and unit level and color coding of repair parts which decreased on-hand repair part inventory.[4]

Marine wears the M50 mask

Users[edit]

Pmcs
  • Iraq: Used by Iraqi special forces under Counter-Terrorism Service.[5]
  • United States: In service with all branches of the U.S. military.[6]

References[edit]

This article incorporates public domain material from websites or documents of the United States Marine Corps.

  1. ^'Joint Service General Purpose Mask (JSGPM) M-50/M-51'. USAASC. Retrieved 2018-02-14.
  2. ^American Horse, LCpl Vanessa M. (2 December 2009). 'M50: New Look Same Protection'. United States Marine Corps. Archived from the original on 26 June 2020. Retrieved 22 December 2009.
  3. ^Sanborn, James K. (June 2, 2010). 'Marine Corps fielding new gas mask'. Marine Corps Times. Archived from the original on 9 June 2010. Retrieved 2 June 2010.
  4. ^Maruscak, John (January–February 2001). 'Mask cuts breathing effort'(PDF). The Warrior: 12.
  5. ^'Counter-Islamic State OF Iraq and Syria (ISIS) Train and Equip Fund (CTEF)'(PDF). US Secretary of Defence. Retrieved 27 February 2020.
  6. ^'M50 M51 joint service general purpose mask'. Retrieved 27 February 2020.

External links[edit]

  • US Air Force: The New M50 Gas Mask on YouTube, M50 Gas Mask Valve Replacement on YouTube

Army Gas Mask M50 Pmcs Powerpoint Art

Wikimedia Commons has media related to M50 Joint Service General Purpose Mask.

Army M50 Mask

Retrieved from 'https://en.wikipedia.org/w/index.php?title=M50_joint_service_general_purpose_mask&oldid=991146386'